Sorry, no Sway bar are found for Lancer VII Saloon (CS_A, CT_A) 1.8 SEi (CS5A) 122 in the database. For all your questions do not hesitate to contact us.
E-Mail: [email protected]
Monday - Friday 7:00am - 8:00pm
<<
<
1
2
3
4
5
>
>>
Product ID: MAB-114Z
- Fitting Position: Rear Axle, Rear
- Weight [kg]: 0,217
- Packaging length [cm]: 5,0
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,5
- Condition: New
Details
Product ID: 26587
- Spanner Size: 21
- Wheel Fastening: Flat Seat
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 37,5
- Quality/ Grade: 8
- Surface: Chromed
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0,08
- Observe service information
- Vehicle configuration line / variant: Sport
- Material: Steel
- Bolt/Nut Version: Cap Nut, with lockwasher
- Diameter [mm]: 30
- Internal Thread Size: M12 x 1,5
- Condition: New
Details
Trailing arm / Suspension arm bush STARK SKTA-1060620
outer, inner, Rear Axle Lower, in front of axle
outer, inner, Rear Axle Lower, in front of axle
Product ID: SKTA-1060620
- Fitting Position: outer, inner, Rear Axle Lower, in front of axle
- Inner Diameter [mm]: 12
- Weight [kg]: 0,133
- Diameter [mm]: 36,5
- Production date from: 200311, 200412
- Total Length [mm]: 44,5
- Condition: New
Details
Product ID: MI-BJ-10371
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17
- Thread Size: M12X1.25
- Length [mm]: 47
- Mounting Type: Pressed
- Packing Type: Box
- Packaging length [cm]: 13
- Packaging width [cm]: 8,5
- Packaging height [cm]: 6,5
- Condition: New
Details
Product ID: 0425-CSL
- Transmission Type: Manual Transmission
- Production date to: 200411
- Fitting Position: Front, Rear Axle Upper
- Control/Trailing Arm Type: Control Arm
- Weight [kg]: 0,507
- Packaging length [cm]: 23,0
- Packaging width [cm]: 6,0
- Packaging height [cm]: 4,5
- Condition: New
Details
Product ID: NC1157
- Quantity Unit: Set
- Quantity: 4
- Thread Size: M12
- Thread Pitch [mm]: 1.5
- Wheel Fastening: Conical Seat F
- Angle [°]: 60°
- Spanner Size: 19, 21
- Drive side (profile): Hexagon
- Colour: chrome
- Surface: Chromed
- Product line: LoKNoX
- Length [mm]: 32.5
- Rims: for light alloy rims, for steel rims
- Condition: New
Details
Product ID: 71084
- Fitting Position: Front Axle
- Cone Size [mm]: 20
- Diameter [mm]: 40,1
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- only in connection with: Circlip
- Observe service information
- Article number of the recommended special tool: R10080
- Condition: New
Details
Product ID: JTC7580
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 656
- Cone Size [mm]: 18
- paired article number: JTC7579
- Inner Diameter [mm]: 14
- Diameter 1 [mm]: 59,5
- Diameter 2 [mm]: 53,7
- Condition: New
Details
Product ID: G6-1204
- Fitting Position: Lower, Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G6-1205
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 14,2
- Bolt Head Diameter [mm]: 20
- Condition: New
Details
Product ID: G6-1205
- Fitting Position: Right, Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G6-1204
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 14,2
- Bolt Head Diameter [mm]: 20
- Condition: New
Details
Product ID: OP-UWN10007-20
- Spanner Size: 21
- Wheel Fastening: Flat Seat
- Fitting Position: Rear Axle, Front Axle
- Quality/ Grade: 8
- Bolt Head-/Nut Design: Male Hex
- Vehicle configuration line / variant: Sport
- Material: Steel
- Height [mm]: 38
- Diameter [mm]: 30
- Internal Thread Size: M12x1,5
- Condition: New
Details
Product ID: 5064671
- Track widening per axle [mm]: 50
- Thread Size: M12x1,5
- Bolt Hole Circle Ø [mm]: 114,3
- Number of Holes: 4
- Thread Size: M12x1,5
- Registration Type: with TÜV® certificate
- Thickness [mm]: 25
- Colour: silver
- Thickness [mm]: 25
- Bolt Hole Circle Ø [mm]: 114,3, 114.3
- Number of Holes: 4
- Registration Type: with TÜV® certificate
- Track widening per axle [mm]: 50
- Centering Diameter [mm]: 67.1
- Material: Aluminium
- Follow installation instructions
- Condition: New
Details
Anti roll bar Lancer 7 Limousine (CS_A, CT_A)
- Lancer VII Saloon CS_A, CT_A 1.6 (CS3A) 98 HP 09.2003 - 12.2013
- Lancer VII Saloon CS_A, CT_A EVO VIII - 260 (CT9A) 265 HP 03.2004 - 07.2005
- Lancer VII Saloon CS_A, CT_A 2.0 (CS9A) 135 HP 12.2003 - 12.2013
- Lancer VII Saloon CS_A, CT_A EVO IX (CT9A) 280 HP 01.2005 - 09.2007
- Lancer VII Saloon CS_A, CT_A EVO VII (CT9A) 280 HP 01.2001 - 01.2003
- Lancer VII Saloon CS_A, CT_A 1.3 82 HP 09.2003 - 12.2013
Anti roll bar MITSUBISHI LANCER
Favourable Prices
Greatly reduced prices on many brand-name spares
RELIABLE SHIPPING
Free delivery for orders over £ 240
Fast delivery
Your order will be dispatched as soon as possible after receipt of payment
Shipping method
