Spark plugs MITSUBISHI Lancer 7 (CS_W, CT_W) 4G18 1.6 98 HP
Spark plug
<<
<
2
3
4
5
6
>
>>
Product ID: V99-75-1020
- Spanner Size: 21
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Construction Year to: 05/2006
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,7
- Supplementary Info: Q+, original equipment manufacturer quality
- Vehicle Equipment: for vehicles with gas operation
- Condition: New
Details
Product ID: 686S0071
- Construction Year to: 05/2006
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
Details
Product ID: 686S0320
- Spanner Size: 16 mm
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Plug: Fixed SAE connector, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Product line: V-Line
- Quantity: 4
- Condition: New
Details
Product ID: 2756
- TecDoc Engine Number: 4G18
- Construction Year to: 06/2006
- Spanner Size: 16 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
Details
Product ID: 8EH 188 704-191
- Construction Year to: 06/2006
- not for country specific design: USA
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: Copper Centre Electrode
- Thread Size: M14 x 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 25
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Assy./disassy. by qualified personnel required!
- Condition: New
Details
Product ID: 686S0003P
- Construction Year to: 05/2006
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,8
- Product line: Nickel
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
Details
Product ID: V99-75-0020
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 1,1
- Product line: Q+, original equipment manufacturer quality
- Specification: Recommended
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
Details
Product ID: 8EH 188 704-011
- Construction Year to: 06/2006
- not for country specific design: USA
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
Details
Product ID: 686S0009
- Construction Year to: 05/2006
- Required quantity: 4
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
Details
Product ID: SKSP-1990008
- Construction Year to: 05/2006
- Required quantity: 4
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 1,1
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
Details
Product ID: 686S0003
- Construction Year to: 05/2006
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
Details
Product ID: SKSP-1990002
- Construction Year to: 05/2006
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Electrode Gap [mm]: 0,9
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
Details
Spark plugs Lancer 7 (CS_W, CT_W)
- Lancer VII Estate CS_W, CT_W 2.0 (CS9W) 135 HP 09.2003 - 12.2007
- Lancer VII Estate CS_W, CT_W EVO (CT9W) 280 HP 09.2005 - 03.2007
- Lancer VII Estate CS_W, CT_W 2.0 (CS6W) 125 HP 08.2005 - 10.2008
- Lancer VII Estate CS_W, CT_W 1.8 GDi T (CS5W) 165 HP 09.2003 - 10.2008
- Lancer VII Estate CS_W, CT_W 2.4 GDI 133 HP 09.2003 - 10.2008
Spark plugs MITSUBISHI LANCER
- Engine spark plug MITSUBISHI Lancer VIII Saloon (CY_A, CZ_A)
- Engine spark plug MITSUBISHI Lancer VII Saloon (CS_A, CT_A)
- Engine spark plug MITSUBISHI Lancer VIII Hatchback (CX_A)
- Engine spark plug MITSUBISHI Lancer VI Saloon (CJ_, CP_)
- Engine spark plug MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A)
- Engine spark plug MITSUBISHI Lancer II Saloon (A17_)
Favourable Prices
Greatly reduced prices on many brand-name spares
RELIABLE SHIPPING
Free delivery for orders over £ 240
Fast delivery
Your order will be dispatched as soon as possible after receipt of payment
Shipping method
