Wheel Drive MITSUBISHI Lancer 4 (C6_A, C7_A) 4G93(DOHC16V) 1.8GTi 16V (C69A) 140 HP
CV joint
Product ID: CVN1230
- Fitting Position: Wheel Side
- External Toothing wheel side: 25
- Internal Toothing wheel side: 30
- Transmission Type: Manual Transmission
- Sealing Ring Diameter [mm]: 50
- Condition: New
Details
Product ID: 62-05-598
- Fitting Position: Wheel Side
- Length [mm]: 95
- Overall Length [mm]: 154
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Number of Teeth, ABS ring: 29
- Sealing Ring Diameter [mm]: 50
- Specification: Groove type: MIDDLE
- External Thread [mm]: 22 x 1,5
- Condition: New
Details
Product ID: 302015100349
- Length [mm]: 595
- External Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 52,5
- Specification: BELL PIN LENGTH - 93
- External Toothing differential side: 22
- Condition: New
Details
Product ID: 639005
- Fitting Position: Front Axle, transmission sided
- Transmission Type: Manual Transmission
- Length [mm]: 155,3
- Sealing Ring Diameter [mm]: 35
- Internal Toothing differential side, conn. to transmission: 30
- External Toothing differential side: 25
- Condition: New
Details
Product ID: NPW-MS-013
- Fitting Position: Front Axle, transmission sided
- Sealing Ring Diameter [mm]: 35
- Diameter [mm]: 83
- Internal Toothing differential side, conn. to transmission: 30
- External Toothing differential side: 25
- Fabrication Number: NPW-MS-013
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: New
Details
Product ID: GI-598
- Fitting Position: Wheel Side
- Length [mm]: 95
- Overall Length [mm]: 154
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Number of Teeth, ABS ring: 29
- Sealing Ring Diameter [mm]: 50
- Specification: Groove type: MIDDLE
- External Thread [mm]: 22 x 1,5
- Condition: New
Details
Product ID: QVJ1146
- Fitting Position: Wheel Side
- Transmission Type: Manual Transmission, Fully Automatic
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 54
- Machined: with groove in internal component
- Diameter 1 [mm]: 23,73
- Condition: New
Details
Product ID: GI-H32
- Fitting Position: Wheel Side
- Length [mm]: 95
- Overall Length [mm]: 154
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- External Thread [mm]: 22 x 1,5
- Condition: New
Details
Product ID: OJ-HY-0607
- Braking/Drive Dynamics: for vehicles without ABS
- Transmission Type: Manual Transmission, Automatic Transmission
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]: 155
- External Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 54
- Braking/Drive Dynamics: for vehicles without ABS
- Joint Diameter [mm]: 82.5
- Condition: New
Details
Product ID: 303388
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Transmission Type: Manual Transmission, Fully Automatic
- Length [mm]: 151,5
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 54
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 82
- Thread Size: M22x1.5
- Supplementary Article / Supplementary Info Info 2: with crown nut, with rubber bellow
- Diameter 1 [mm]: 23,73
- Condition: New
Details
Product ID: 62H32
- Fitting Position: Wheel Side
- Length [mm]: 95
- Overall Length [mm]: 154
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- External Thread [mm]: 22 x 1,5
- Condition: New
Details
Product ID: CV-5509
- Fitting Position: Wheel Side, Front Axle
- Length [mm]: 156
- External Toothing wheel side: 25
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 54
- Condition: New
Details
Joint drive shaft for Lancer 4 (C6_A, C7_A)
- Lancer IV Hatchback C6_A, C7_A 1.5 12V (C62A) 90 HP 05.1989 - 05.1992
- Lancer IV Hatchback C6_A, C7_A 1.8 GTi 16V (C68A) 136 HP 11.1989 - 05.1992
- Lancer IV Hatchback C6_A, C7_A 1.8 4WD (C77A) 97 HP 09.1989 - 06.1992
- Lancer IV Hatchback C6_A, C7_A 1.6 16V (C76A, C66A) 113 HP 06.1992 - 05.1994
- Lancer IV Hatchback C6_A, C7_A 1.5 (C62A) 84 HP 06.1988 - 05.1992
- Lancer IV Hatchback C6_A, C7_A 1.6 4WD (C76A, C66A) 114 HP 06.1992 - 11.1993
Joint kit, drive shaft for MITSUBISHI LANCER
Favourable Prices
Greatly reduced prices on many brand-name spares
RELIABLE SHIPPING
Free delivery for orders over £ 240
Fast delivery
Your order will be dispatched as soon as possible after receipt of payment
Shipping method
